Tandberg-data Autoloader Tandberg LTO2 Manual de usuario descargar pdf (Pagina 43)

- 27 -

3.6.2 Changing the SCSI ID

Operation Example 1

The operation procedure and LCD indications are described below when changing the SCSI ID

of the Autoloader from 0 to 1.

Operation 1

Switch ON the power and wait for the completion of the power-on test.

Display: "READY" and "DRV empty" are alternately displayed.

Operation 2

Press the ENTER key.

Display: STATUS

Operation 3

Press the arrow key and select the "SCSI ID" command.

Display: SCSI ID

Operation 4

Press the ENTER key and define the command.

Display: View ID?

Operation 5

Press the arrow key and select the "Set ID" command.

Display: Set ID?

Operation 6

Press the ENTER key and define the command.

Display: Lib.ID?

Operation 7

Press the ENTER key and define the command.

Display: Lib. ID 0?

Operation 8

Press the arrow key and select the "Lib. ID1" command.

Display: Lib. ID 1?

Operation 9

Press the "ENTER" key and define the command.

Display: Complete

Operation 10

Set the power switch of this device to OFF.

Operation 11

Switch the power of this device ON again.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 84 85

Sin comentarios

Tandberg-data Autoloader Tandberg LTO2 Manual de usuario Pagina 43